The use of electronic crossover has been an almost untapped resource, which now is easily explorable with Densen and the SAXO.

Basically, an active system requires as many power amplifiers as your speaker has "ways" (2, 3, 4-way); i.e., if you have a two-way loudspeaker, you can use two B-300 or a single B-340. If you have a three or four-way loudspeaker, you should have just as many power amplifiers, though this is not necessarily the case, since you can utilize some of the passive crossover in the speaker in combination with the SAXO. In this way you can use one single B-340 in combination with a three or more way system. You can keep on expanding forever.

The SAXO crossover is mounted inside the power amplifiers, so it is not visible from the outside. Furthermore you do not have to add more boxes, power supplies or cables when you expand your system with an electronic crossover.

All Densen's BEAT power amplifiers are prepared for the SAXO electronic crossover. The SAXO is custom-made and hand assembled to precisely fit your loudspeaker. There are no limitations to what loudspeakers can be used with the SAXO other than that they have to be passive.

If you later decide to upgrade your loudspeaker to another model or brand your SAXO crossover will not be obsolete. The SAXO crossover you have bought can be upgraded to fit a new type of loudspeaker.

For at small cost the SAXO takes the airguitar factor to an even higher level. Your Hi-Fi system will never have sounded as transparent, detailed, focused, open and live as it will with the SAXO crossover.

If we have not yet done a SAXO for your particular speaker brand and model it must be possible for us to get a hold of these in Denmark. If this is not possible we need to have your speaker sent to Denmark so we can make the SAXO.